Used equipment for foundation works www.drillmat.com, the common internet site of BMB Baumaschinen Beyer GmbH and Beck&Stöckli Ingenieure Sitemap • Imprint • Disclaimer
 

Various

ID-No
(more details)
MANUFACTURE / TYPE DESCRIPTION NOTE
2338 Rope- / hoisting- / kelly winch ZOLLERN ZHP 4.24, unused / new torque 18.000 Nm, rope load 75.000 N. With new hydraulic motor HYDROMATIK! unused / new
1376 Bracket with pulley for pull back for drilling gear KLEMM GH 120   good
2146 Weight frame 2 frames with each 2 coupling loops good
2153 1 lot ladders consisting of: 1 x 1,1 m // 1 x 2,4 m // 1 x 2,7 m // 2 x 3 m / 1 x 6 m steel ladders good
2155 Tension anchor Drag-bar with Ø ab. 42 mm + anchor can be unscrewed ready-to-use
882 man cage «Voggenreiter»    
943 concrete bucket 0,50 cbm good
957 hydraulic press / 2 telescopical piston oil suction one side, lift way total ap. 5400 mm, cylinder outside Ø ap 160 mm, largest length ap. 3400 mm good
1918 Hydraulic cylinder "CASAGRANDE" oil suction two sides, lift way ap. 600 mm, cylinder outside Ø ap. 255 mm, piston-Ø 100 mm good
1641 hydraulic power pack hydraulic-oil tank with pump, electric motor 11 kW, electric switch with old Swiss power outlet, on 4 wheels  
1644 service platform service platform for example for works with tremie pipes, consisting of two longitudinal carriers and grating platformBetonierrohren, bestehend aus zwei Längsträgern und Gitterrostarbeitsfläche  
1814 service platform service platform for example for works with tremie pipes  
2150 Load disconnector Load disconnector for medium voltage switchgear  
1785 Loading traverse Traverse LxWxH = ap. 3000 x 240 x 230 mm, suspension device with two eyes  
2305 Sludge pump SCHWING KSP 17 HDV, from 1991 with integrated electro-hydraulic power pack (2 electric motors with each 30 kW), 2 main hydraulic pumps and one aux. pump. 2 hydr. connections (suppley + return line) + plug socket, control for the additional operation of one mixer / agitator. Cplt. with connect. cable ap. 40 m + CE-plug 125A, as well as package of spare parts. For pumping of concrete, bentonite, back-fill material, sludge etc., as well as sev. industrial capabilities. good condition
2248 rope for crane / excavator Ø 18 mm, length ap. 90 m with loose rope ends, without beckets, on reel probably unused
2249 rope for crane / excavator Ø 18 mm, length ap. 55m with pressed becket ap. 26 mm, one rope end dressed off, on reel unused
2250 rope for excavator Ø 22 mm, length ap. 40 m with loose rope ends, without beckets, on reel used
2329 pulley MENCK M 60 (digging rope) pulley, with long hub, shaft and two-part rope guard. Pulley-Ø ap. 570 mm, shaft-Ø 60 mm, length of shaft ap. 650 mm one part of rope guard is bented, otherwise good
2400 rope pulley rope pulley with 2 grease nipples and inserted bushing. Outer Ø of pulley ap. 320 mm, inner Ø in bushing ap. 70 mm, without bushing ap. 78 mm. Largest width (at the hub) ap. 70 mm. good condition.
2 pcs. available!
2404 rope pulley rope pulley with inserted bushing. Outer Ø of pulley ap. 390 mm, inner Ø in bushing ap. 70 mm. Largest width (at the hub) ap. 70 mm. good condition.
2 pcs. available!
2405 rope pulley rope pulley with needle bearing. Outer Ø of pulley ap. 390 mm, inner Ø in bushing ap. 70 mm. Largest width (at the hub) ap. 90 mm. 2 pcs. available! (1 pc. good / 1 pc. defective)
2357 support frame CASAGRANDE with support struts. Distance / wide between main lug - center/center bolts = ap. 1.160 mm struts are bented, 1 bolt is missing
2358 hitch (2 pcs.) with pin retainer and counter safety device (both spring-loaded) good condition, functional checked
2407 proportional valve DANFOSS 120 / 32 PVG 60 hydraulic control block, 6-way proportional valve faulty, fragmented
2410 brake straps 1 strap woven, length ap. 1.730 mm, wide 100 mm, thickness ap. 11 mm
1 strap woven, length ap. 1.500 mm, wide 70 mm, thickness ap. 8 mm
1 strap rolled and grooved, length ap. 970 mm, wide 80 mm, thickness ap. 5 mm
1 strap rolled and grooved, length ap. 520 mm, wide 80 mm, thickness ap. 5 mm
all straps are unused but dusty